Tag Archives: diy-high-voltage

Recommended Diy-high-voltage

DIY HACK – Cheap high voltage

Check out this cool DIY you can make some cheap high voltage.  I’ve always wanted to do this at a low cost but here it is!

What you see here is a spent propane torch tank with a 1-inch (2.5cm) ball bearing glued to it with a 1/4-inch (6mm) bearing glued to that. I stripped the propane tank with paint stripper, but this is unnecessary as you can just scrape off the paint where the ball bearings go. The Leyden jar is just a common quart sized polyethylene bottle cut off at the top. The

Click Here to Read Full Article