If you are looking to mod your PC, a pyramid PC case mod such as this one not be a bad idea after all. You might even be able to sell bunch of these as pyramid-scheme business too.
1- Drilled and installed 2x 80mm fans on each side of the case for better air flow.
2- Installed Sound Sensitive Cathodes in the bottom of the case with sensitivity control knob at the back of the case.
3- The 3.5 pay at the top of the case has been modified to fit the 500GB WD hard drive instead of the designed place at the bottom of the case.
4- Water cooling (Tide Water Plus meant for cooling dual GPU has been modified to cool Intel Q6600 with the help of Swift Apogee GT water Block CPU socket 775). Non conductive Fluid-XP has been used as the coolant of choice for extra safety.
5- A display LED screen on top of the CD-Rom has been installed to add an interactive touch to the Pyramid PC Mod. See you YouTube video:The case is 7.5 lbs, made of laser cut very high quality black and silver aluminum. Its base is 19×19 and its 25 inches high.
