Here’s a nice little circuit diagram for all those hardcore DIYers if you are trying to build a dual fan controller using an ATtiny45 although I’d never use this thing, I’d rather use a CUBLOC.
Over the course of a weekend, I cobbled together some leftover robot parts to create a simple dual-fan controller. The board turns on the first fan when the temperature reaches a user-adjustable dial setting, and it turns on a second fan if the temperature exceeds an additional 5 degrees Fahrenheit. With this method, only a single fan is used if the temperature can be kept under control with only one fan, but both fans will kick on if necessary.
3 Responses to DIY Dual Fan Controller Project
Leave a Reply
Other interesting stuff at Zedomax.com: circuit_diagram, cubloc, diy-fan, dual-fan-diy, dual_fan, fahrenheit, fan_controller, HOWTO, Robots, temperature
How on earth do you find the time to do all these things Max? I wish that I could have half the energy and time that you seem to be flush with. What is the secret?
Great idea though.
It’s Latin for me……….
It’s very complicated for only a fan controller, you can do the same for cheap by using only a thermistor, some resistors and a transistor 😉