Here’s a great way to turn your monotonous T-shirt into a very fashionable cut-out T-shirt using simple tools such as scissors and some planning.

This might be helpful those of you who are struggling in these hard U.S. economic times but still need a new shirt without buying one.

Ever since seeing Zana’s cutout skull sweater by Pleasure Principle, I’ve had a major crush on the label. From their fantastically simple split knee jeans to their knot dress, their designs are extremely covetable. Anyway, to the point of this article (which wasn’t to gush about the brand), I’d been lusting over Pleasure Principle’s cut out spine tee for what seems like ages when I realized that it would make a rather simple DIY project.

via chictopia

Click Here to View in Full Screen Mode

Check out the LED Dragon, kind of a cool DIY project if you know how to engrave glass.

I have to say that even I was surprised how well the dragon version turned out. Three very simple flames and bit of light and magic can really spice up the engraving. And this was the whole point of this project.

It took only minutes to engrave the flames but I have to admit that it took way longer that I expected to get all the taping done, leds mounted and hooked up. On top of all this, it was pain to keep all the layers clean during the assembly.

via hackedgadgets

Click Here to View in Full Screen Mode

Remember my Green Laser Projectr DIY?  Well, here’s a similar DIY project except it uses a speaker to send vibrating pulses to the end-results beams instead of a motor.

So how does one go about making one of these things? Well, I made every effort to make construction as simple as possible for two reasons. One, electrical engineering is far from my speciality and I didn’t want to kill myself/ruin a laser I could only afford one of. Two, I always hated seeing incredibly awesome projects on the internet that I never had any hope of building due to funds and bizarre parts. That’s not to say you don’t need some basic soldering and construction skills, as well as a healthy respect for the power of laser light, but it’s definitely doable if you put your mind to it.

via hacknmod

Here’s a great USB DIY Sound Card that NEEDS NO XP drivers. It’s plug-N-play. For a DIY project, very impressive and everyone should make their USB DIY “driver-less”.

Make a sound card is no more a complex issue. If you use great IC PCM2702 from BURR BROWN / Texas Instruments you can create a fully functional USB sound card. This sound card can be powered from USB port and has one stereo output. You don�t need to install any driver for Windows XP and Vista, because they are already inside. This is really plug and play.

Few months ago I have seen USB sound card called Alien DAC. The construction on the project web page inspired me to build this thing also.

via make

Click Here to View in Full Screen Mode

Lol, this has got to be the best DIY project I have seen this year. A white board plotter! I need this as I used my white board a lot but do feel if I had such an automated plotter, I could be doing a lot better at jotting down my ideas more clearly than what is now, simply scrambled jotting.

Well, using the Internet to take a look at the whiteboard isn’t that difficult: just take a webcam and point it at the board. Writing it will be a bit more difficult: there’s something like a plotter needed for that. I’d like the solution to be lightweight: while a completely Borgified whiteboard has its charm too, I’d like to alter mine as little as possible. That’s why I decided to use an idea I saw first at the 24C3: a way of hanging a pen using 2 rubber belts and two motors called a bipod. Problem was that I had no info of that device (I found the youtube-link while writing this article) so I had to work from memory.

[via] HackaDay

Tight, check out this really cool M&M Line Trace Robot! It’s awesome! They should sell these at M&M stores. (I recently bought a M&M sculpture for my dad’s birthday but this is even better!)

For the holidays, my local grocery store sold m&m’s candy containers in the shape of a racecar. The containers are painted metal (probably steel), with a thin plastic coating on the inside. A dinky package of plain m&m’s came inside, not peanut, as the yellow-color driver suggests.

About this same time, the ChiBots robot club began discussing holding a robot line-following contest. Naturally, the colorful candy tin seemed like a perfect body to motorize and drive around the course.

via