SMART introduces Flat Panel Digital Whiteboards!
Here’s a cool flat panel digital whiteboard. Now, if they can make these or simply add it as an additional feature for digital picture frames, that’d make my world perfecto.
Best of all, this technology can be used with any existing front projection, rear projection, and LCD TVs.
SMART presented its flat-panel interactive whiteboard at the infoCom08 in Las Vegas. It is able to simply touch the display to control computer applications, write in digital ink and save works. Compatible with a broad range of flat-panel display sizes and brands, SMART Board for Flat-Panel Displays interactive whiteboards use DViT(Digital Vision Touch) technology to ensure touch precision without compromising image quality.
Related posts
(No Ratings Yet)
Loading ...Sharp working on Solar LCD TVs!
Sharp is working on solar LCD TVs for houses without electricity.
The only question I have is, if they don’t get electricity, will they get any TV reception at all? (Maybe air reception is good… real good…)
LCD prototype which uses just a quarter of the power (or a third measured annually) of a conventional CRT with the same screen size. That’s low enough to be suitably powered by a Sharp, triple-junction thin-film solar cell module whose surface area is roughly equivalent to that of the LCD screen.
Related posts
(1 votes, average: 4 out of 5) Loading ...DLP TV HACK - How to Reset Your Samsung DLP TV Lamp Hours Setting!
Well, today, my 42″ Samsung DLP TV I bought in 2005 broke down on me. The only thing I got from the TV was a Lamp LED going on and off.
So I figured that it was time for the Lamp to be swapped out for a new one.
Before doing that, I ran into this blog posts about how to reset the Lamp hour setting on the Samsung DLP TV.
Once I resetted the Lamp hour, my TV started working again! Yey, I guess the manufacturer, Samsung, put an hourly limit on the lamp so you replace the lamp but hey, why replace it until it’s truly broken?
Here’s the simple instructions on how to reset that lamp hour setting and make your DLP TV lamp last longer:
Mute + 1 + 8 + 2 + Power.
Your TV set should now say “Loading Factory”.
Browse down to “Option” then press Enter (or the right cursor button).
Related posts
(No Ratings Yet) Loading ...19″ Hello Kitty LCD TV!
For fans of Hello Kitty, here’s a 19″ Hello Kitty LCD TV to match your Hello Kitty purses, beds, dolls, etc…etc…
Our cute, nice 19″ TV provides a resolution of 1440×810, a contrast ratio of 1,000:1, brightness of 300cd/m², and response time of 5ms. It features a 1Seg tuner, built-in speakers (3Wx2), and HDMI Interface. Available in two colors, Black & White, and costs 415€.
Related posts
(No Ratings Yet) Loading ...Comcast 10 Million Pixel HDTV!
Click Here to View in Full Screen Mode
Wow, this thing IS pretty amazing, when can I buy one for $2000?
One thing for sure, Comcast has money to burn…
The media wall covers an area of over 2100 square feet and uses four-millimeter LED lights, packed together as one giant, seamless array. It plays all manner of video, and even cool segments where three-dimensional-looking dancers seem to hover in thin air at five times the resolution of HD television.
Related posts
(No Ratings Yet) Loading ...DIY Hack - HOWTO Make A High Voltage Supply in 5 Minutes!
Click Here to View in Full Screen Mode
Here’s a fun DIY for experimenting with some high voltage from spare TV parts.
In this Instructable you will learn how to make a High Voltage High Frequency power supply in 5 minutes and for less than $20.
All you need is a compact fluorescent light (CFL) and a flyback transformer.
Flyback transformers are found in TVs and CRT monitors. They make the high voltage, high frequency current necessary to trace the electron beam across the screen. They are small and compact, and you can take them out from an old computer monitor or TV.
Related posts
(No Ratings Yet) Loading ...Crank TV Remote with No Battery!
Here’s a prototype TV remote that works by user squeezing the handle to generate little itty bits of electricity to change the channel or the volume. Nice work, this might be the start of many other battery-free remote controls.
This is the No Battery Remote Control by the SMK Corp. it works on the principal similar to one of those toy ray guns, where the user squeezed the trigger a few times and it began to light up the lights and make futuristic sounds. This RC has a similar mechanism which is enough to power the RC for a few changes of channel and maybe even volume control too. It’s a prototype at the moment, but it has to be the best green TV remote around.
-
- Crank TV Remote with No Battery!
Related posts
(No Ratings Yet) Loading ...The PoD - Watch YouTube Videos on TV w/o a PC!
Here’s a cheap “smart” device that let’s you watch Youtube videos on TV without connecting your PC.
Why didn’t I think of this before?
Continue reading ‘The PoD - Watch YouTube Videos on TV w/o a PC!’
Related posts
(No Ratings Yet) Loading ...Protect Your TV from Wii Damage with TV Armor!
Now you can protect your precious HDTV you just bought with TV Armor, a thick acrylic protection that goes over the front of your TV. Definitely, this is what you need if you play Wii.
I have to ask though, is the image still same after putting this on?
Continue reading ‘Protect Your TV from Wii Damage with TV Armor!’