后面： DIY文丐-如何做一个太阳能加热器在50个大型装配架以下!
Zedomax DIY 128 -如何做发光的心脏LED夜光!
我最近在我的地方美元商店，并且，当我看了这心形的接触光，我必须乱砍一为我的gf。这一个快的文丐关于怎样做规则接触光和做它成发光的心脏夜光。
点击“持续读”看完全howto。
零件单
接触光从地方美元商店： $1
CB220 Module: $34
12V Adaptor: $9
11 RED High Output LEDs : about $5
Soldering stuff
screw driver
Total Cost for parts: $54
1) First you get the parts ready…
2) Unscrew the screws on the Tough Light and open it up.
3) Build the Proto-board and then build the circuit.
4) Get rid of the bulb.
5) You can use a 12V adaptor to power the thing or use 9V battery too.
6) Cut the end of the adaptor and slide it through the holes in the Heart Touch Light.
7) Connect the cut lines to the DC Jack of the protoboard
Connect the DC Adaptor ends as shown above.
9) Place the whole board on top.
10) Get a piece of plastic or make a little film piece using scotch tape.
11) tape it nice so the board stays in tact.
12) Download this program to the CUBLOC CB220 module:
Const Device = CB220 Dim Duty As Integer Dim direction As Byte Dim onoff As Byte Dim ct As Byte onoff=0 Output 5 Output 6 Output 7 Duty=0 direction=0 On Timer(5) Gosub here Do Loop here: If direction=0 Then Duty=Duty+25 Else Duty=Duty-25 End If Pwm 0,Duty,1024 Pwm 1,Duty,1024 Pwm 2,Duty,1024 If Duty>1024 And direction=0 Then direction=1 If Duty<5 And direction=1 Then direction=0 For ct=0 To 15 onoff = onoff Xor 1 Out 0,onoff Out 1,onoff Out 2,onoff Out 3,onoff Out 4,onoff Wait 50 Next End If Return
12) Screw the whole Touch Light together and test it out!
Related posts
(No Ratings Yet)
Loading ...Got a new hack, DIY, howto, or gadget? Tip us here.
Search for a Hack:
Bookmark It!
|Digg it |SiteHoppin |Wagg It | TrackBack
Email this to a Friend
Email This Post
the strobe would keep me up at night (it must be a night time party light)
yeah, that might be the idea there… hehe…
Great IDEA! :0)
you should add a function to make the whole thing shut off after a certian time…
Thats cool , good gift for the girls
[...] Instructions here. Cool, DoItYourself!, girlfriend, heart, love, valentines day, www youtubeCool, DoItYourself!, girlfriend, heart, love, valentines day, www youtube var dc_UnitID = 14; var dc_PublisherID = 13853; var dc_AdLinkColor = ‘blue’; var dc_adprod=’ADL’; If you like this post then please subscribe to my full feed RSS. You can also subscribe by Email. Invest on our new One Buck Wiki or Five Dollar Wiki before prices go up. My friend Colbert is getting married, check it out on ProBloggerWedding.com. pay per click [...]
[...] If you care to make one for yourself, you can take a look at how to make an LED glowing heart at zedomax. [...]