Click Here to View in Full Screen Mode

Here’s a cool video that asks a ninja about technology.

Click Here to View in Full Screen Mode

Check out this video that someone is “microwaving” CDs!

via Da Bomb TV

Click Here to View in Full Screen Mode

Click Here to View in Full Screen Mode

Here’s a cool hack for your XBOX 360 if you want to make it like a Wii controller or a SixAxisController.

The accelerometer works by outputting varying voltages for varying accelerations. I will use a 3-axis accelerometer so it will output 3 varying voltages. I will use an analog-to-digital converter to get the signals into a micro controller. The micro controller will do the processing that determines how the controller is tilted. It will then be output as an analog voltage to the controller in place of the on board potentiometers that are controlled by the analog stick.

Analog sticks work by adjusting two potentiometers (pots). After I took the controller all apart and experimented I found the potentiometers had an upper voltage of 1.61 volts and a lower voltage of 0 volts. On the up/down pot all the way up is 1.61 volts and all the way down is 0 volts. On the left/right pot all the way right is 0 volts and all the way left is 1.61 volts.”

via

Here’s a cool hack if you use a lot of barcodes and carry a whole bunch of cards that you don’t
need. A barcode is simply a number when translated. You can refer to our touchscreen barcode
reader also for how to make a simple bar code reader.

via

Well, I know we have been posting bunch of videos, but yes, we were hibernating so we can
make a new cool video website!  :p  Anyways, you can check it out since we are just gettin’
started!
Okay, here’s a cool video site that you can check out that we, me and Kenji made yesterday
for fun! It’s basically a bunch of videos that are Da Bomb!

If you have some cool videos, make sure to submit them to Da Bomb TV!

Here’s a cool video of a freaky overclocking chip cooler from CES.

Click Here to View in Full Screen Mode

Here’s a cool internet controlled security robot you make yourselves and protect your home or office!

Wow, here’s a cool internet controlled security robot using CUBLOC
CB280, CuBASE 32M, CLCD420B, and a MAXPORT. Thanks Shelato!

There are two components to the interface. One a Visual basic program that sends and receives commands to the cubloc. Two, the cubloc program that receives the commands, controls the cubloc and turns the outputs on and off.

The fully load version on the test stand. It runs wireless!!!!!!!! However, I’m tethered to the power supplies for the Linksys router and Cubloc power supply. Next weekend we go to full battery power.

The Maxport is sticking out the backend of truck connected to the Linksys router through the blue ethernet cable. 2 Green lights can been seen on the Cubloc. The LCD display is in the passanger window.

via cubloc

Wow, this is one cool keyboard I wanna get.