Here’s an awesome talking skull for halloween!

“I took him out to the garage and disconnected his eye and mouth motors from the main post. I then used 2 - 2″ screws and attached the jaw to the motor of the douglas talking fir(DTS now) I used hot glue and sealed the screws to the mouth to insure no slippage. I made a fitting in the skull with a 90 degree fitting and a 3″ piece of PVC that I attached to the inside of the skull with screws. I can now attached the skull to the crossbones, or remove it, since the fitting on the crossbones is a male, and the one on the skull is female, making storage, setup, and fixing easier!”

via hackedgadgets

Tags: Circuits, Consumer, Cool, costume, DoItYourself!, DoItYourself!, Entertainment, hackedgadgets, halloween, Motor, project, skull, talking_skull, Video, Zedomax

This entry was posted by max on Friday, October 27th, 2006 at 10:00 am and is filed under Circuits, Consumer, Cool, DoItYourself!, Entertainment, Motor, Video.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.